Query returned 978 results.
A concept for assessing environmental sustainability and circularity in the development phase on the basis of a sustainable PLM strategy
Kristin Paetzold-Byhain; Kathrin Greiff; Berfin Bayram; Bernhard Saske // 2024
Technological advancements to improve the mechanical behaviour of fiber reinforced plastic (FRP) make sense as a result. In the context of the circular economy and sustainability, however, a holistic ...
AESTHETICS OF CARE AND SUSTAINABILITY IN TECHNOLOGICAL EDUCATION: IMPLEMENTING A GAME-BASED METHODOLOGY
PEREZ, Santiago; PAVLOVA, Yoana; FORNET VIVANCOS, Antonio; KOUTSOMICHALIS, Marinos; GEORGALLIS, Teresa; MCCABE, Hugh; DUGGAN, Brenda // 2024
There is a wide agreement that Sustainability has failed. Planetary resource exploitation and the capitalist call for short-term planning and quick profit (often at all costs) have, arguably, been ...
AI-Based Retrival to Encourage Reuse of CAD-Designs: A Methodological Study and Future Perspectives
Gronvald, Jakob Meinertz; Norgaard, Morten; Heidari, Negar; Bakhtiarnia, Arian; Mortensen, Niels Henrik // 2024
Product development today faces challenges like customization demands and shorter life cycles. Companies adopt generational approaches to save time and costs but struggle with increased variation and ...
BINDING AI AND XR IN DESIGN EDUCATION: CHALLENGES AND OPPORTUNITIES WITH EMERGING TECHNOLOGIES
Mendoza Garcia, Christiam Ivan; Munoz Guzman, Angel Daniel; Sanchez Ruano, David // 2024
Our Design Program at Tec de Monterrey is progressively incorporating Artificial Intelligence (AI) tools, further enhanced by Extended Realities (XR), into our pedagogical practice. This innovative ...
CONNECTING THE LOOP: TEACHING END-OF-LIFE DESIGN ISSUES THROUGH PRACTICAL WEEE DISASSEMBLY
Potter, Claire J; Greenfield, David // 2024
It is often cited that ‘80% of a product’s environmental impact is decided at the design stage’ (European Commission, 2012) and yet it can be very difficult to ensure that undergraduate students ...
Data pipelines for product function prediction in circular factories
Jonas Hemmerich; Laura Dorr; Christoph Wittig; Patric Grauberger; Anne Meyer; Sven Matthiesen // 2024
Optimizing global material flow and resource consumption is a key goal of the circular economy. Regarding production, the circular economy relies on the targeted reprocessing of used products, ...
Decision Support Systems for Engineering High Variety Low Volume Artefacts
Bertoni, Alessandro; Juuti, Tero; Rehman, Mubeen Ur // 2024
The paper presents a review of existing decision support systems relevant to the practitioners in sales and engineering phases in High variety low volume (HVLV) projects. The data for the analysis is ...
DEVELOPING AN OPEN-SOURCE LEARNING ANALYTICS TOOL FOR PROVIDING INSIGHTS TO SUPPORT STUDENTS AND IMPROVE TEACHING PRACTICE
Covill, Derek; Tooze, James; Prieto Cabrera, Pablo; Owen Lloyd, Gareth; Grundy, Cate // 2024
This abstract introduces the development of a course level data analytics tool which we’ve called ‘the student record’. This tool aims to transition our course team away from a passive, standardised, ...
DEVELOPMENT OF A FULLY FUNCTIONING ARTIFICIAL DESIGN TUTOR – A QUEST FOR REFRAMING INTELLIGENT TUTORING SYSTEMS
Berglund, Anders // 2024
This paper presents a scrutinizing attempt to design an artificial design tutor (ADT) that can specifically support development task throughout the phases of product development. In the format of a ...
Engineering Better Decisions: Exploring Influencing Factors of Behavioral Economics on SGE - System Generation Engineering
Batora, Mona; Ognevoj, Roman; Schock, Moritz; Ritzer, Katharina; Bursac, Nikola // 2024
Decisions made during product development, from ideation to market readiness, are pivotal. Focusing on SGE – System Generation Engineering, this study investigates the impact of behavioral economics ...
ENGINEERING DESIGN – DOES AI CHANGE THE PATH OF EVOLUTION IN METHODS & TEACHING?
Woolman, Tim // 2024
The appearance of engineering design methods has evolved from drawing boards and blueprints to CAD screens and possibly augmented reality. Has decision making evolved, or is artificial intelligence ...
Exploratory study to investigate the influence of reference systems in the model of product generation engineering
Mona Batora; Nikola Bursac; Tolga Ekin; Timo Heinrich; Anusch Musawi; Katharina Ritzer // 2024
Products are developed in generations and based on reference products. The decision and selection of suitable reference system elements (RSE) is a challenging process. In order to investigate the ...
Exploring Indicators for Multiple Modes in Resource-Constrained Project Scheduling
Gergely Lajos Novak; Zsolt Tibor Kosztyan // 2024
Project scheduling is a critical aspect across various industries that is still extensively studied. Unlike project plans for the resource-constrained project scheduling problem, those in the ...
EXPLORING THE IMPACT OF GENERATIVE AI ON CONCEPT GENERATION, IDEATION, AND DESIGN METHODOLOGY: IN PRODUCT DESIGN EDUCATION
Reynolds, Timothy James; Batley, Abigail // 2024
This paper presents an investigation into the utilisation of generative artificial intelligence (AI) by product design students in the concept generation, ideation, and design methodology of their ...
IS AI ‘JUST’ A NEW TECHNOLOGY? ON INTEGRATING AI EDUCATION IN DIGITAL DESIGN CURRICULA
van Turnhout, Koen; Shayan, Shakila; Smits, Aletta // 2024
Many design schools struggle with questions of how recent AI advancements should be integrated into their curriculum. This is especially challenging for curricula with a substantial digital design ...
Modeling and Analyzing Interactions Between Stakeholders for Train Decarbonization Decisions at a Regional Scale
Benoît Volant; Franck Marle; Yann Leroy; Jeanne-Marie Dalbavie // 2024
This study addresses the complex network process regarding the technological swap of diesel-powered regional trains to reach the Paris Agreement's targets. Interviews with technical experts from ...
THE ETHICAL USE OF ARTIFICIAL INTELLIGENCE IN HIGHER EDUCATION IN TEC21 MODEL
Saavedra Gastélum, Verónica; Román Jiménez, Olaf Ramiro; González Amaguer, Carlos Alberto; Zubieta Ramírez, Claudia; Castellanos Saavedra, Cristina; FRÍAS REID, Natalia // 2024
Artificial Intelligence (AI) has grown exponentially in the last few years. This could be a great opportunity for some areas since AI can contribute to minimise the time for optimising some ...
The Silent Influence of Designed Things: A Postphenomenological Approach to Embodied Interaction
Martinez Gasca, Omar; Van Campenhout, Lukas // 2024
In this research we aim to establish connections between design decisions on material and interactive qualities of technological artifacts and their influence in concretizing or reframing people’s ...
Towards a Framework for the Continuous Decision-Making Concerning Variety-Induced Cost of Complexity in the Product Generation Development Process
Maximilian Ridder; Lea-Nadine Woller; Dieter Krause // 2024
Existing approaches for considering and evaluating product family concept alternatives in terms of variety-induced cost of complexity focus only on the subsequent evaluation of total concepts and are ...
A case study of the decision-making behind the automation of a composites-based design process
Khanolkar, Pranav Milind;Vrolijk, Ademir;Olechowski, Alison // 2023
Automation and artificial intelligence (AI) are increasingly seen as appealing tools to perform design tasks traditionally accomplished by human designers. In today’s digital economy, industries aim ...
A hierarchical exploration of how design margins enable adaptability
Jacobson, Lindsey;
Ferguson, Scott // 2023
Our society is built on engineered systems. Engineers are becoming increasingly concerned with the sustainability of systems, particularly their ability to adapt to a changing world. Recently, there ...
A multi-criteria decision-making approach to optimize the part build orientation in additive manufacturing
Sartini, Mikhailo (1);Luca, Manuguerra (1);Claudio, Favi (2);Marco, Mandolini (1) // 2023
The part build orientation is a manufacturing variable that must be considered when designing a product to maximise AM opportunities. There are several approaches to selecting the best print ...
A multi-objective decision-making approach to support the design of social innovations in the Energy sector
Samir, Basma;
Abi Akle, Audrey;
Lizarralde, Iban // 2023
Social innovations in the energy sector (SIE) are essential for accelerating the transition to clean, renewable, and democratic energy while encouraging citizens' involvement. However, SIE lacks ...
A Multilayer Graph Network-Based Tool for Identifying Key Project Actors
Efrati, Shlomi;
Reich, Yoram // 2023
As the demands for new complex products/services increase, leading to strict constraints on budget and time-to-market, it is hard to learn from experience and improve practice. Improvement can be ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.